Cause:

User inadvertently used Fluorescent tile during calibration instead of White ceramic tile.

Solution:

Calibrate the instrument with the correct White tile.

1. How can I verify instrument communication to my Datacolor software?
2. Where can I find documentation for the Elrepho 3000 family of instruments?
3. I get an error "Not enough storage", when trying to measure a sample on my Datacolor Check.
4. What is Gloss Compensation?
5. What spectrophotometers or instruments can be used in Datacolor software?
6. During the Back trap calibration, the instrument does not flash and the software quickly asks for the White tile.
7. Missing calibration file on Mercury/Check.
8. Proper care of the calibrating tile
9. Most of the colors are too yellow in the Spectral Test.
10. Measurement of the green diagnostic tile failed.
11. Datacolor Gloss Compensation
12. Error: "Wrong black trap"
13. Spectrophotomers - Tips for Optimal Performance
14. How do I reset the PDA? (application hang, dead PDA, unreadable screen)
15. Inter-instrument agreement-Software to the Rescue
16. What does status code 00211 mean on the LCD display of DC 500 and 800 series spectro