Customized filters are based upon default filters but provide much more flexibility in data retrieval and allow the user to retrieve standards or batches based upon user-defined fields or other criteria, e.g. season, brand, pass/fail decision, etc.

For more information please refer to the attached document.

• editing_filters_in_datacolor_tools.pdf

1. How to import/export QTX files in Datacolor Tools?
2. Datacolor Tools does not start or crash after login
3. I am getting Overflow error or math errors in Datacolor Tools
4. How can I calibrate the UV content in my Spectrophotometer to measure Whiteness?
5. Datacolor QTX File Specification
6. It’s not possible to start Datacolor Tools after a new installation and I don’t get an error message.
7. How do I insert a sample manually?(L*,a*,b* coordinates or Reflectance values)
8. What are best practices for measuring textile samples?
9. Datacolor Tools v.2 Quick Start Guide
10. How to use Datacolor Tools to determine Haze?
11. Where can I find Walmart Forms and Templates?
12. UV Calibration and Whiteness FAQs
13. How do I solve the error, "GeneralDataSecurityException: LoggedOn, Cannot connect to the remote host"
14. What type of calculation does Datacolor Tools use for metamerism index?
15. Walmart Process for Datacolor Tools 2.0
16. Is our Datacolor Tools 1.x software going to work with Windows7 ?
17. Green tile test gives unstable results when TOOLS is connected to Microflash 45 IR (MF45 IR)
18. After starting Dtools,"GeneralDataSecurity Exception:Initialize Database failure Specified Database not found, Err1:-83 Err2:1, Vendor 1 08003, [Sybase][ODBC Driver] [Adaptive Server Anywhere] D
19. How to change color tolerances?
20. System runs slowly / Sometimes after measuring samples, the data is very slow to be displayed in Datacolor Tools.
21. Imported samples from QTX files cannot be stored into the database, possible error messages "Sybase ODBC error - - Column Sample ID in standard table cannot be null." or "[Sybase][ODBC
22. Strength methods in Datacolor Tools 2.x
23. Error message when opening Tools 1.2 : "This form has been created to use illuminant #85712 but there are only three active illuminants. Will adjust to current illuminant!".
24. Datacolor Tools 1.3 release version does not let me calibrate my MF45 and MF45IR.
25. How to enable the top menu?
26. Emailing measurement data from Tools QC
27. How to Change illuminant/Observer ?
28. How to change the Standard- or Batchname, if the description is not correct.
29. How to print forms in Tools?
30. UV calibration sometimes gives negative whiteness values.
31. How do I remove the gray background on the printout of reflectance plots in Datacolor Tools?
32. How to change Tolerance Limit?
33. Solving Common Problems with Datacolor Tools
34. How do I change the standard measurement of my instrument’s diagnostic tile?
35. Imported samples from QTX files cannot be stored into the database,possible error messages "Sybase ODBC error - - Column Sample ID in standard table cannot be null." or "[Sybase][ODBC D
36. Where can I locate Tools_Global and the .FRM files in Windows Vista?
37. How do I create general tolerances in Datacolor Tools 1.x?
38. How do I download the latest Wal-Mart forms?
39. How do I save the current screen form so that it appears every time I start Datacolor Tools?
40. After measuring or retrieving a sample, I get errors "math domain, power overflow."
41. How do I create/add user fields in Tools?
42. How can I export samples from my TOOLS desktop to another TOOLS user?
43. AATCC UV Calibration Procedure
44. How can I retrieve my samples I stored in the Match program, into Datacolor Tools?
45. How do I change the number of measurements to default to, for an average?
46. How to Change Measurement mode from Single to Average and make it a default setting?
47. Cleaning up DatacolorTools-Copying data from one folder to another and deleting folders
48. When we try to open Tools we are getting this error:
49. How to Add Labels in Graphs?
50. How do I change the time between instrument calibrations?
51. Cannot edit button bars
52. How do I setup the green tile reading for optional?
53. How do I export information from my template in Datacolor Tools 2.x to Excel
54. What is contrast ratio and how do I use it?
55. What does error after monitor calibration "Error:unknown error:(536936466) [20010012] generate icc profile:CopyProfileWithICM 360
56. Can I use Datacolor Tools to evaluate high visibility and safety apparel with ANSI 107?
57. How do I display the Gray Scale for Staining and Gray Scale for Color Change in Datacolor Tools?
58. How do I add the CSI Color Solutions International colorwall into Tools for Search
59. How can I search my Tools database for a color close to a new color standard?
60. What is APHA10 and how is it used in Tools QC?
61. How do I create an Artificial Intelligence tolerance in Tools 2.x?