If the instrument is communicating properly and you are getting a message "instrument not calibrated" after completing calibration, open c:\Program files\Datacolor\Common Files\CometFlashClientTest.exe and set calibration interval to 8 hours by selecting Calibrate Service button, and Calibrate tab. Change Calibration Time Interval (hours) to 8.

1. I have version xx.xx for Paintmaker or Datacolor Paint; is this the latest version?
2. Invalid file name runtime error 20507
3. "runtime error ’20567’ Error in file C:PaintmkrdataXXX.rpt Page Header or Footer longer then Page"
4. How to setup a dispenser in a computer to computer configuration?
5. Runtime error 429 active x component cannot create object when attempting to print a label
6. How do I set up a dispenser software to software ?
7. Instrument Communications Error in Paintmaker or Datacolor Paint
8. Invalid White Tile Measurement. Wrong tile? (DF-100)
9. Error: "a timeout error occurred communicating with the dispenser. Cannot dispense. Timeout occurred on line @start."
10. How do I setup ColorPro software on the same computer as Datacolor Paint or Paintmaker?
11. How do I backup my customer file, if I don’t have a floppy drive?
12. I have a problem with instrument calibration or communication, or I get the following error "component error return the following transfer error will now abort media name data component df
13. I have several Paintmaker or Datacolor Paint CD’s. Which one do I install?
14. How do I set up a Dymo Labelwriter printer in Datacolor Paint or Paintmaker?
15. Labels are printing on two labels instead of one
16. This control NoSpec.Dll does not support a measurement device.
17. How to setup Datacolor Paint ?
18. How do I install new white tile calibration data in Datacolor Paint?
19. How do I download from a Microflash?
20. I don’t have a floppy disk drive or my calibration data is on another source (CD, Flash Drive, Network, etc.)
21. The settings specified in the hrblcomm.ini were not valid.
22. How do I store a new diagnostic tile measurement in Paintmaker or Datacolor Paint, if I have replaced my white tile, or changed instruments?
23. I need help installing a Paintmaker upgrade.
24. Labels do not print correctly, printer does not feed labels correctly, the ready light on the printer blinks after attempting to print.
25. Getting error "curtin form load - error 372 failed to load control cscomb32.ocx"
26. Error number -2147417848
27. Just downloaded instrument data from e-mail, how do I load the new calibration data?
28. I have purchased multiple databases and got multiple CD’s. Which one do I load first?
29. "I need to order another formula book (hard copy) or color chips/chip rack or I have questions concerning updated formula book formulas (or any question concerning the contents of formula books)
30. My buttons and features are missing from the Datacolor Paint or Paintmaker software.
31. Software validation screen appears when attempting to run Paintmaker on a system that has already been validated, indicating that the demonstration period has expired.
32. How do I set up a loaner instrument?
33. An error Occurred During Instrument Measurement
34. I can’t find the paint bases I need to make a match.
35. I ordered a particular manufacturer’s database with my system and did not get it.
36. How do I get information on Orchard Supply Hardware Upgrades?
37. I am experiencing instrument calibration or communication problems
38. Why can’t I do a custom match using a certain product?
39. What’s the current recommended printer?
40. Is there a manual for Paintmaker?
41. Where do I purchase labels for labelmaker?
42. How to convert volumetric output to shots output, in retail paint