Datacolor Logo
     Datacolor - Industrial Business Unit Online Knowledgebase System     
Knowledge Base Home Knowledge Base Home | Knowledge Base Glossary Glossary | Contact Us Contact Us
Home > All Categories > Software > Retail > Invalid file name runtime error 20507
Question Title Invalid file name runtime error 20507
Exit Datacolor Paint or Paintmaker and access the printer properties for the Dymo Labelwriter (either Costar xl plus, Dymo EL60, Dymo 300, or Dymo 400 series). Make sure the print orientation is set to Landscape, and check for what size of label you use, to make sure the correct paper size is selected (see sheet for available Dymo paper Sizes, most use the shipping label 30256). Once you have established the proper printer settings, exit the printer properties and re-enter Datacolor Paint or Paintmaker. Try to print a label.  You may also need to check the printer setup from the Options page in Datacolor Paint, to see if the proper printer is selected for the POS default printer and the proper report size has been chosen.

Click Here to View all the questions in Retail category.
Related Questions Related Questions
  1. "runtime error ’20567’ Error in file C:PaintmkrdataXXX.rpt Page Header or Footer longer then Page"
  2. How to setup a dispenser in a computer to computer configuration?
  3. Runtime error 429 active x component cannot create object when attempting to print a label
  4. Invalid White Tile Measurement. Wrong tile? (DF-100)
  5. How do I set up a dispenser software to software ?
  6. I have several Paintmaker or Datacolor Paint CD’s. Which one do I install?
  7. Error: "a timeout error occurred communicating with the dispenser. Cannot dispense. Timeout occurred on line @start."
  8. Instrument Communications Error in Paintmaker or Datacolor Paint
  9. How do I backup my customer file, if I don’t have a floppy drive?
  10. I don’t have a floppy disk drive or my calibration data is on another source (CD, Flash Drive, Network, etc.)
  11. This control NoSpec.Dll does not support a measurement device.
  12. I need help installing a Paintmaker upgrade.
  13. How do I download from a Microflash?
  14. How to setup Datacolor Paint ?
  15. How do I store a new diagnostic tile measurement in Paintmaker or Datacolor Paint, if I have replaced my white tile, or changed instruments?
  16. Error number -2147417848
  17. Labels are printing on two labels instead of one
  18. How do I setup ColorPro software on the same computer as Datacolor Paint or Paintmaker?
  19. An error Occurred During Instrument Measurement
  20. How do I install new white tile calibration data in Datacolor Paint?
  21. How do I set up a Dymo Labelwriter printer in Datacolor Paint or Paintmaker?
  22. The settings specified in the hrblcomm.ini were not valid.
  23. Getting error "curtin form load - error 372 failed to load control cscomb32.ocx"
  24. Just downloaded instrument data from e-mail, how do I load the new calibration data?
  25. I have version xx.xx for Paintmaker or Datacolor Paint; is this the latest version?
  26. How do I set up a loaner instrument?
  27. I have a problem with instrument calibration or communication, or I get the following error "component error return the following transfer error will now abort media name data component df
  28. I have purchased multiple databases and got multiple CD’s. Which one do I load first?
  29. Is there a manual for Paintmaker?
  30. Software validation screen appears when attempting to run Paintmaker on a system that has already been validated, indicating that the demonstration period has expired.
  31. My buttons and features are missing from the Datacolor Paint or Paintmaker software.
  32. I am experiencing instrument calibration or communication problems
  33. "I need to order another formula book (hard copy) or color chips/chip rack or I have questions concerning updated formula book formulas (or any question concerning the contents of formula books)
  34. Labels do not print correctly, printer does not feed labels correctly, the ready light on the printer blinks after attempting to print.
  35. How do I get information on Orchard Supply Hardware Upgrades?
  36. I still receive a calibration error after correct calibration file data is installed.
  37. What’s the current recommended printer?
  38. Why can’t I do a custom match using a certain product?
  39. Where do I purchase labels for labelmaker?
  40. I ordered a particular manufacturer’s database with my system and did not get it.
  41. I can’t find the paint bases I need to make a match.
  42. How to convert volumetric output to shots output, in retail paint
Article Information Additional Information
Article Number: 142
Created: 2009-04-01 10:47 PM
Article Options Article Options
Print Question Print this Question
Export to Adobe PDF Export to PDF File
Subscribe to Article Subscribe to Article
Language Translation Language Translation
Search Knowledge Base Search Knowledge Base

Powered by PHPKB Knowledge Base Software