Datacolor Logo
     Datacolor - Industrial Business Unit Online Knowledgebase System     
Knowledge Base Home Knowledge Base Home | Knowledge Base Glossary Glossary | Contact Us Contact Us
Home > All Categories > Software > Retail > "runtime error ’20567’ Error in file C:PaintmkrdataXXX.rpt Page Header or Footer longer then Page"
Question Title "runtime error ’20567’ Error in file C:PaintmkrdataXXX.rpt Page Header or Footer longer then Page"
Exit Paintmaker or Datacolor Paint and access the printer properties for the Dymo Labelwriter (either costar xl plus, Dymo EL60 or Dymo 330). Make sure the print orientation is set to Landscape, and check what size label you use, to make sure the correct paper size is selected (see sheet for available Dymo paper Sizes, most use the shipping label 30256). Once you have established the proper printer settings, exit the printer properties and re-enter Paintmaker or Datacolor Paint.  Try to print a label. You may also need to check the printer setup from the Options page and check to see if the proper printer is selected for the POS default and the proper report size has been chosen.

Click Here to View all the questions in Retail category.
Related Questions Related Questions
  1. Invalid file name runtime error 20507
  2. How to setup a dispenser in a computer to computer configuration?
  3. Runtime error 429 active x component cannot create object when attempting to print a label
  4. Invalid White Tile Measurement. Wrong tile? (DF-100)
  5. How do I set up a dispenser software to software ?
  6. I have several Paintmaker or Datacolor Paint CD’s. Which one do I install?
  7. Error: "a timeout error occurred communicating with the dispenser. Cannot dispense. Timeout occurred on line @start."
  8. Instrument Communications Error in Paintmaker or Datacolor Paint
  9. How do I backup my customer file, if I don’t have a floppy drive?
  10. I don’t have a floppy disk drive or my calibration data is on another source (CD, Flash Drive, Network, etc.)
  11. I need help installing a Paintmaker upgrade.
  12. This control NoSpec.Dll does not support a measurement device.
  13. How do I download from a Microflash?
  14. How do I store a new diagnostic tile measurement in Paintmaker or Datacolor Paint, if I have replaced my white tile, or changed instruments?
  15. How to setup Datacolor Paint ?
  16. How do I setup ColorPro software on the same computer as Datacolor Paint or Paintmaker?
  17. Labels are printing on two labels instead of one
  18. Error number -2147417848
  19. How do I install new white tile calibration data in Datacolor Paint?
  20. How do I set up a Dymo Labelwriter printer in Datacolor Paint or Paintmaker?
  21. The settings specified in the hrblcomm.ini were not valid.
  22. An error Occurred During Instrument Measurement
  23. Getting error "curtin form load - error 372 failed to load control cscomb32.ocx"
  24. How do I set up a loaner instrument?
  25. Just downloaded instrument data from e-mail, how do I load the new calibration data?
  26. I have version xx.xx for Paintmaker or Datacolor Paint; is this the latest version?
  27. I have purchased multiple databases and got multiple CD’s. Which one do I load first?
  28. My buttons and features are missing from the Datacolor Paint or Paintmaker software.
  29. I have a problem with instrument calibration or communication, or I get the following error "component error return the following transfer error will now abort media name data component df
  30. "I need to order another formula book (hard copy) or color chips/chip rack or I have questions concerning updated formula book formulas (or any question concerning the contents of formula books)
  31. Software validation screen appears when attempting to run Paintmaker on a system that has already been validated, indicating that the demonstration period has expired.
  32. I am experiencing instrument calibration or communication problems
  33. Is there a manual for Paintmaker?
  34. Labels do not print correctly, printer does not feed labels correctly, the ready light on the printer blinks after attempting to print.
  35. I still receive a calibration error after correct calibration file data is installed.
  36. How do I get information on Orchard Supply Hardware Upgrades?
  37. What’s the current recommended printer?
  38. Why can’t I do a custom match using a certain product?
  39. Where do I purchase labels for labelmaker?
  40. I ordered a particular manufacturer’s database with my system and did not get it.
  41. I can’t find the paint bases I need to make a match.
  42. How to convert volumetric output to shots output, in retail paint
Article Information Additional Information
Article Number: 132
Created: 2009-03-27 7:46 PM
Article Options Article Options
Print Question Print this Question
Export to Adobe PDF Export to PDF File
Subscribe to Article Subscribe to Article
Language Translation Language Translation
Search Knowledge Base Search Knowledge Base

Powered by PHPKB Knowledge Base Software